Delta EB3000 Series User Manual page 276

04-76
Encoder Slip Detection Time (maximum output frequency Pr.03-50=100%)

Control Mode
Settings
Brake Resistor Detection
04-80
Brake Resistor Detection during Operation

VF
Control Mode
Settings
04-81
Brake Over-current Percentage

VF
Control Mode
Settings
 When brake current exceeds maximum brake over-current percentage, fault code Socb occurs.
04-82
Pulse Time

VF
Control Mode
Settings
 Detects brake resistor before operation. Pr.04-82 determines brake transistor activation time.
04-83
Brake Resistor

VF
Control Mode
Settings
Over-acceleration Detection
04-90
Over-acceleration Detection Selection
VF
Control Mode
Settings
04-91
Over-acceleration Level

VF
Control Mode
Settings
04-92
Over-acceleration Detection Time
VF
Control Mode
Settings
SVC FOCPG
0.0–10.0 sec.
SVC FOCPG
0–1
0: Does not detect brake resistor
1: Detects brake resistor
SVC FOCPG
100–155%
SVC FOCPG
300–600
SVC FOCPG
0.0–6553.5 ohm
SVC FOCPG
0: Always detect
1: Detect during operation
SVC FOCPG
0.0–20.0 m/s
2
SVC FOCPG
0.01–5.00 sec.
8-04-13
Chapter 8 Descriptions of Parameter SettingsEB3000
FOCPM Default: 0.5
FOCPM Default: 0
FOCPM Default: 140
FOCPM
Default: 300
FOCPM Default: 0.0
FOCPM Default: 0
FOCPM Default: 0.0
FOCPM Default: 0.05