Delta EB3000 Series User Manual page 232

02-23
Emergency Power (EPS) Mode Operation Speed
VF
Control Mode
02-24
Power Generation Direction Search Time

VF
Control Mode
Settings
02-25
Power Factor Angle Level for Power Generation Direction

VF
Control Mode
Settings
 During operation, if the largest power factor angle is larger than Pr.02-25 setting value, the
power generation direction is the current operation direction.
02-26
Reference Level for Power Factor Angle during Operation
VF
Control Mode
 The largest power factor angle during operation.
02-27
Power Generation Direction
VF
Control Mode
Settings
02-28
UPS Output Delay Time

VF
Control Mode
Settings
02-29
UPS Stops Output Delay Time
VF
Control Mode
Settings
 Pr.02-28: At power failure, the contactor sends a MI signal to inform the drive to activate UPS.
Then, the drive sends a MO signal to activate the UPS contactor after Pr.02-28 delay time.
 Pr.02-29: After the controller deactivates the emergency power mode, it stops sending a MO
signal to deactivate the UPS power after Pr.02-29 delay time.
 Related parameters: multi-function input commands Pr.01-00–Pr.01-07 function setting 54
(Power failure signal) and multi-function output terminals Pr.01-10–Pr.01-15 function setting 49
(Emergency power mode action).
SVC FOCPG
SVC FOCPG
0.0–5.0 sec.
SVC FOCPG
0.0–150.0°
SVC FOCPG
SVC FOCPG
0: FWD
1: REV
SVC FOCPG
0.0–10.0 sec.
SVC FOCPG
0.0–60.0 sec.
Chapter 8 Descriptions of Parameter SettingsEB3000
FOCPM
FOCPM
FOCPM
FOCPM
FOCPM
FOCPM
FOCPM
8-02-9
Default: Read only
Default: 1.0
Default: 70.0
Default: Read only
Default: Read only
Default: 1.0
Default: 3.0