Delta EB3000 Series User Manual page 122

6-2-2 Motor Auto-tuning
6-2-2-1 Motor Settings
Pr.00-10 Motor Rated Power
 Sets the rated power of the motor. The default is the power of the drive.
Pr.00-11 Motor Rated Voltage
 Set this parameter according to the rated voltage on the motor nameplate. If the motor is
220V, set this parameter to 220.0. If the motor is 200V, set this parameter to 200.0.
Pr.00-12 Motor Rated Current
 Set this value according to the rated motor current from the motor nameplate.
Pr.00-13 Motor Rated Frequency
 Set this parameter according to the rated frequency on the motor nameplate. If the motor is
60 Hz, set this parameter to 60. If the motor is 50 Hz, set it to 50.
6-5
Chapter 6 Tuning ProcessEB3000