Delta EB3000 Series User Manual page 220

 When Pr.01-25=1, Pr.01-22 and Pr.01-34 can only be set to 0 and 1.
 When Pr.01-31=1, Pr.01-28 can only be set to 0 and 1.
01-23
AUI1 Input Gain

VF
Control Mode
Settings
 Pr.01-21–Pr.01-23 are used when the Frequency command source is the analog voltage/current
signal.
 When Pr.01-25=1, only positive gain can be inputted.
01-29
AUI2 Input Gain

VF
Control Mode
Settings
 Pr.01-27–Pr.01-29 are used when the Frequency command source is the analog voltage/current
signal.
 When Pr.01-31=1, only positive gain can be inputted.
01-35
ACI Input Gain

VF
Control Mode
Settings
 Pr.01-33–Pr.01-35 are used when the Frequency command source is the analog voltage/current
signal.
 When Pr.01-25=1, only positive gain can be inputted.
SVC FOCPG
-500.0–500.0%
SVC FOCPG
-500.0–500.0%
SVC FOCPG
0.0–500.0%
8-01-15
Chapter 8 Descriptions of Parameter SettingsEB3000
When Pr.01-25 and Pr.01-31 are set to
1: Unipolar (0–10 V), Pr.01-22, Pr.01-
28, and Pr.01-34 input gain is positive.
1: Bias serves as center, lower than or
equal to bias
FOCPM
Default: 100.0
FOCPM Default: 100.0
FOCPM Default: 100.0