Delta EB3000 Series User Manual page 184

00 Basic Parameters
Initialized Settings
00-00
Parameter Reset
VF
Control Mode
Settings
 1: Set all parameters to read-only except Pr.07-00–Pr.07-20, and you can use this setting with
the password setting for password protection.
 9 or 10: Reset all parameters to the default. If the keypad is locked by a password, enter the
password to reset to the default. The password is also erased.
 8: Lock the keypad and only Pr.00-00 and Pr.07-20 can be changed.
00-01
Control Mode
VF
Control Mode
Settings
 Mode selection
Control
Settings
Mode
0 V/F
1 SVC
2 FOCPG
3 FOCPM
 Determines the AC motor drive control method.
0: You can set the V/F ratio as required and control multiple motors simultaneously.
1: Use auto-tuning for optimal settings of the control parameters.
2: To increase torque and the accuracy of the speed control (1:1000).
3: To increase torque and the accuracy of the speed control (1:1000). This setting is for use only
with permanent magnet motors. The other settings are for use with induction motors.
SVC FOCPG
0: No Function
1: Read Only
5: Direct docking mode only, contact Delta for more information.
8: Keypad Locked
9: Reset all parameters to defaults (50 Hz)
10: Reset all parameters to defaults (60 Hz)
SVC FOCPG
0: V/F control (V/F)
1: Sensorless Vector Control (SVC)
2: FOC vector control + Encoder (FOCPG)
3: FOC Permanent Motor control (FOCPM)
Applicable Speed Energy-
Motor Type Feedback savings
IM Low
IM Medium
✓
IM High
✓
PM High
Chapter 8 Descriptions of Parameter SettingsEB3000
: You can set this parameter during operation.
FOCPM
FOCPM
Tuning Ride
Difficulty Comfort
Low Normal
Medium Normal
High Good
High Good
8-00-3
Default: 0
Default: 0
Speed Motor
Basic
Control Parameter
Control
Range Tuning
V/F
1:50
control
✓
Voltage
1:50
control
✓
Vector
1:1000
control
✓
Vector
1:1000
control
Speed
Control
Voltage
control
Voltage
control
Frequency
control
Frequency
control