Delta EB3000 Series User Manual page 127

Chapter 6 Tuning ProcessEB3000
26: Reserved
27: ASR1/ASR2 selection
28: Emergency stop (EF1) (motor coasts to stop)
29–30: Reserved
31: High torque bias (according to Pr.02-43)
32: Middle torque bias (according to Pr.02-44)
33: Low torque bias (according to Pr.02-45)
34–37: Reserved
38: Disable writing to EEPROM
39: Reserved
40: Enable drive function
41: Magnetic contactor detection
42: Mechanical brake 1
43: EPS function (Emergency Power System)
44: Mechanical brake 2
45–51: Direct docking mode only
53: Terminal leveling signal for direct docking
54: Power failure signal
55: Manual emergency deceleration
56: Automatic emergency deceleration
57: STO signal check
Pr.01-10–Pr.01-15 Multi-function Output Settings
 Setting values:
0: No function
1: Indication during operation
2: Operation speed reached
3: Desired frequency 1 reached (Pr.02-10, Pr.02-11)
4: Desired frequency 2 reached (Pr.02-12, Pr.02-13)
5: Zero Speed (Frequency command)
6: Zero speed with stop (Frequency command)
7: Over-torque (OT1) (Pr.04-40–04-42)
8: Reserved
9: Drive is ready
10: User-defined low-voltage detection (LV)
6-10