Delta EB3000 Series User Manual page 261

Chapter 8 Descriptions of Parameter SettingsEB3000
 When you set the integral time to 0, it is disabled. Pr.03-91 defines the switch frequency for the
ASR1 (Pr.03-18, Pr.03-19) and ASR2 (Pr.03-20, Pr.03-21).
 When using multi-function input terminals to switch ASR1/ASR2, the following diagram shows
the operation.
03-92
Low Speed ASR Width Adjustment

Control Mode
Settings
03-93
High Speed ASR Width Adjustment

Control Mode
Settings
 These two parameters set the width of the slope of the ASR command during zero speed to low
speed or Pr.03-91 to high speed.
Setting MI=17 ASR1 / ASR2 switch
FOCPG
0.00–400.00 Hz
FOCPG
0.00–400.00 Hz
8-03-14
FOCPM Default: 5.00
FOCPM Default: 5.00