Delta EB3000 Series User Manual page 27

Chapter 3 Option CardsEB3000
Install the PG card according to the following steps.
Step 1: Align positioning holes
Step 2: Tighten the screws
Align two positioning holes of the
PG card with the positioning
columns of middle case, and then
vertically press down the PG card
to the PCB surface.
Tighten the three M3 screws that
are enclosed with accessory
packages using a screwdriver
with a torque of 6–8 kg-cm. Then,
the installation of PG card is
completed.
3-6