Configuration Replace File - HP 6125XLG Command Reference Manual

undo configuration encrypt
Default
Configuration encryption is disabled. The running configuration is saved to a configuration file without
encryption.
Views
System view
Predefined user roles
network-admin
Parameters
private-key: Encrypts configuration with a private key. Only the encrypting device can decrypt the
encrypted configuration file.
public-key: Encrypts configuration with a public key. Any device running the same software version as
the encrypting device can decrypt the encrypted configuration file.
Usage guidelines
Configuration encryption enables the device to automatically encrypt a configuration file when saving
the running configuration to the file.
Do not move or copy a private-key-encrypted configuration file between IRF member devices. Doing so
can cause a decryption failure, because the member devices use different private keys.
Examples
# Enable the public-key method for configuration encryption.
<Sysname> system-view
[Sysname] configuration encrypt public-key

configuration replace file

Use configuration replace file to perform configuration rollback.
Syntax
configuration replace file filename
Views
System view
Predefined user roles
network-admin
Parameters
filename: Specifies the name of the replacement configuration file for configuration rollback.
Usage guidelines
To replace the running configuration with the configuration in a configuration file without rebooting the
device, use the configuration rollback function. This function helps you revert to a previous configuration
state or adapt the running configuration to different network environments.
To ensure a successful configuration rollback:
126