Table of Contents
Advertisement
Interfaces
(config network interface my_wan)> ipv6 ?
IPv6
Parameters
-------------------------------------------------------------------------------
dhcp_hostname
enable
metric
mgmt
mtu
type
use_dns
weight
Additional Configuration
-------------------------------------------------------------------------------
connection_monitor
(config network interface my_wan)>
d. Modify any of the remaining default settings as appropriate. For example, to change the
metric:
(config network interface my_wan)> ipv6 metric 1
(config network interface my_wan)>
If the minimum length is not available, then a longer prefix will be used.
See
Configure WAN/WWAN priority and default route metrics
metrics.
8. Save the configuration and apply the change:
(config network interface my_wan)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure a Wireless Wide Area Network (WWAN)
Configuring a Wireless Wide Area Network (WWAN) involves configuring the following items:
Required configuration items
The interface type: Modem.
n
The firewall zone: External.
n
The cellular modem that is used by the WWAN.
n
Digi Connect IT® Mini User Guide
Current Value
false
DHCP Hostname
true
Enable
0
Metric
0
Management priority
1500
MTU
dhcpv6
Type
always
Use DNS
10
Weight
Active recovery
Wide Area Networks (WANs)
for further information about
83
Advertisement
Table of Contents
