Digi Connect IT Mini User Manual page 440

User authentication
É
WebUI
1. Configure a user on the RADIUS server:
a. On the ubuntu machine hosting the FreeRadius server, open the
/etc/freeradius/3.0/users file:
$ sudo gedit /etc/freeradius/3.0/users
b. Add a RADIUS user to the users file:
admin1 Cleartext-Password := "password1"
Unix-FTP-Group-Names := "admin"
In this example:
n
n
n
c. Save and close the users file.
2. Configure a user on the TACACS+ server:
a. On the ubuntu machine hosting the TACACS+ server, open the /etc/tacacs+/tac_plus.conf
file:
$ sudo gedit /etc/tacacs+/tac_plus.conf
b. Add a TACACS+ user to the tac_plus.conf file:
user = admin1 {
name ="Admin1 for TX64"
pap = cleartext password1
service = system {
}
}
In this example:
n
n
n
c. Save and close the tac_plus.conf file.
3. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
4. On the menu, click System. Under Configuration, click Device Configuration.
Digi Connect IT® Mini User Guide
The user's username is admin1.
The user's password is password1.
The authentication group on the Connect IT Mini device, admin, is identified in the
Unix-FTP-Group-Names parameter.
groupname = admin
}
The user's username is admin1.
The user's password is password1.
The authentication group on the Connect IT Mini device, admin, is identified in the
groupname parameter.
Example user configuration
440