Digi Connect IT Mini User Manual page 304

Hide thumbs Also See for Connect IT Mini:

Table of Contents

(config)> service dns stop_dns_rebind false

7. (Optional) Allow localhost rebinding

By default, localhost rebinding is enabled by default if rebind protection is enabled. This is

useful for Real-time Black List (RBL) servers. To disable:

(config)> service dns rebind_localhost_ok false

8. (Optional) Add additional DNS servers

a. Add a DNS server:

(config)> add service dns server end

(config service dns server 0)>

b. Set the IP address of the DNS server:

(config service dns server 0)> address ip-addr

(config service dns server 0)>

c. To restrict the device's use of this DNS server based on the domain, use the domain

command. If no domain are listed, then all queries may be sent to this server.

(config service dns server 0)> domain domain

(config service dns server 0)>

d. (Optional) Set a label for this DNS server:

(config service dns server 0)> label label

(config service dns server 0)>

9. (Optional) Add host names and their IP addresses that the device's DNS server will resolve

a. Add a host:

(config)> add service dns host end

(config service dns host 0)>

b. Set the IP address of the host:

(config service dns host 0)> address ip-addr

(config service dns host 0)>

c. Set the host name:

(config service dns host 0)> name host-name

(config service dns host 0)>

10. Save the configuration and apply the change:

Digi Connect IT® Mini User Guide

Configure DNS