Digi Connect IT Mini User Manual page 85

Interfaces
4. Create the WWAN or select an existing WWAN:
To create a new WWAN, for Add interface, type a name for the WWAN and click g .
n
To edit an existing WWAN, click to expand the WWAN.
n
New WWANs are enabled by default. To disable, click Enable.
5. For Interface type, select Modem.
6. For Zone, select External.
7. For Device, select a cellular modem.
8. Optional WWAN configuration items:
a. For Match SIM by, select a SIM matching criteria to determine when this WWAN should be
used:
n
n
n
n
n
b. Type the PIN for the SIM. Leave blank if no PIN is required.
c. Type the Phone number for the SIM, for SMS connections.
Normally, this should be left blank. It is only necessary to complete this field if the SIM does
not have a phone number or if the phone number is incorrect.
d. Roaming is enabled by default. Click to disable.
Digi Connect IT® Mini User Guide
If SIM slot is selected, for Match SIM slot, select which SIM slot must be in active
for this WWAN to be used.
If Carrier is selected, for Match SIM carrier, select which cellular carrier must be in
active for this WWAN to be used.
If PLMN identifier is selected, for Match PLMN identifier, type the PLMN id that
must be in active for this WWAN to be used.
If IMSI is selected, for Match IMSI, type the International Mobile Subscriber Identity
(IMSI) that must be in active for this WWAN to be used.
If ICCID is selected, for Match ICCID, type the unique SIM card ICCID that must be
in active for this WWAN to be used.
Wide Area Networks (WANs)
85