Table of Contents
Advertisement
Routing
Configure device one (master device)
É
WebUI
Task 1: Configure VRRP on device one
1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > VRRP.
4. For Add VRRP instance, type a name for the VRRP instance and click g .
The new VRRP instance configuration is displayed.
5. Click Enable.
6. For Interface, select Interface: ETH.
7. For Router ID, leave at the default setting of 50.
8. For Priority, leave at the default setting of 100.
9. Click to expand Virtual IP addresses.
10. Click gto add a virtual IP address.
11. For Virtual IP, type 192.168.3.3.
Digi Connect IT® Mini User Guide
Virtual Router Redundancy Protocol (VRRP)
173
Advertisement
Table of Contents
