Services
default, which means that only TLS 1.2 and later encryption protocols are allowed with HTTPS
connections.
To enable legacy encryption protocols:
(config)> service web_admin legacy_encryption true
(config)>
8. (Optional) Disable legacy port redirection.
Legacy port redirection is used to redirect client HTTP requests to the HTTPS service. Legacy
port redirection is enabled by default, and normally these settings should not be changed.
To disable legacy port redirection:
(config)> service web_admin legacy enable false
(config)>
9. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect IT® Mini User Guide
Configure the web administration service
285