Table of Contents
Advertisement
Virtual Private Networks (VPN)
n
n
n
n
n
Digi Connect IT® Mini User Guide
ping (IPv4) or ping6 (IPv6): Tests connectivity by sending an ICMP echo request to
a specified hostname or IP address.
Specify the hostname or IP address by using ping_host or ping_host6:
l
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)> ping_host
host
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
(Optional) Set the size, in bytes, of the ping packet by using ping_size or ping_
l
size6:
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)> ping_size
[ num ]
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
dns (IPv4) or dns6 (IPv6): Tests connectivity by sending a DNS query to the
specified DNS server.
Specify the DNS server. Allowed value is the IP address of the DNS server.
l
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)> dns_
server ip_address
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
dns_configured (IPv4) or dns_configured6 (IPv6): Tests connectivity by sending a
DNS query to the DNS servers configured for this interface.
http (IPv4) or http6 (IPv6): Tests connectivity by sending an HTTP or HTTPS GET
request to the specified URL.
Specify the url. Allowed value uses the format http[s]://hostname/[path].
l
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)> http_url url
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
interface_up (IPv4) or interface_up6 (IPv6): : The interface is considered to be
down based on the interfaces down time, and the amount of time an initial
connection to the interface takes before this test is considered to have failed.
(Optional) Set the amount of time that the interface can be down before this
l
test is considered to have failed:
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)> interface_
down_time value
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interface_down_time to ten minutes, enter either 10m or
600s:
IPsec
214
Advertisement
Table of Contents
