Table of Contents
Advertisement
Troubleshooting
Use the RESET button to reset your device to the factory defaults
You can reset the Connect IT to the factory default settings. Resetting the device to factory defaults
performs the following actions:
Clears all configuration settings.
n
All firmware updates are deleted.
n
Deletes all user files.
n
Regenerates SSH keys.
n
Clears event and system log files.
n
Creates a new event in the event log, indicating a factory reset.
n
Note
While the settings are reset, the device's firmware version remains the same.
1. Make sure that the Connect IT has been powered on for at least 30 seconds.
2. Locate the ERASE button on the right side of the device.
3. Press and briefly hold the ERASE button.
4. The device resets to factory defaults and then reboots automatically.
Tips for improving cellular signal strength
If the signal strength LEDs or the signal quality for your device indicate Poor or No servcie, try the
following things to improve signal strength:
If available, connect a different set of antennas.
n
Purchase a Digi Antenna Extender Kit:
n
Digi Connect IT® Mini User Guide
Antenna Extender Kit, 1
m.
580
Advertisement
Table of Contents
