Table of Contents
Advertisement
Configuration and management
Using Digi Remote Manager
By default, your Connect IT Mini device is configured to use Digi Remote Manager as its central
management server. No configuration changes are required to begin using the Remote Manager.
For information about configuring central management for your Connect IT Mini device, see
management
.
Access Digi Remote Manager
To access Digi Remote Manager:
1. If you have not already done so, go to
Manager account.
Check your email for Digi Remote Manager login instructions.
2. Go to remotemanager.digi.com.
2. Enter your username and password.
The Digi Remote Manager Dashboard appears.
Using the web interface
To connect to the Connect IT Mini local WebUI:
Note
If the Connect IT is connected to your site network instead of your PC, your Connect IT attempts
to use DHCP to establish a connection and obtain an IP address. If a DHCP server is operating on the
site network then the device will receive an IP address configuration from the local network. You can
then access the device using the IP address provided in the DHCP connection instead of the
192.168.210.1 address mentioned in the steps below. You can also see
information about configuring the device remotely if the site network provides Internet connectivity.
1. Use an Ethernet cable to connect the Connect IT Mini's ETH port to a laptop or PC.
2. Open a browser and go to 192.168.210.1.
Note
If the device does not give your PC an IP address via DHCP, you may need to configure
your PC with the static IP settings. See
3. Log into the device using a configured user name and password.
The default user name is admin and the default password is the unique password printed on
the label packaged with your device.
Note
If your device was manufactured prior to firmware version 19.11.x, the default user for
logging into the device may be root, rather than admin.
The default user is root:
n
l
l
Digi Connect IT® Mini User Guide
If the device is at a firmware level 19.8.x or older.
If the device has been upgraded from 19.8.x or older to 19.11.x or newer.
https://myaccount.digi.com/
Manually configure a PC to connect to the Connect
Using Digi Remote Manager
Central
to sign up for a Digi Remote
Central management
for
IT.
27
Advertisement
Table of Contents
