Table of Contents
Advertisement
System administration
Reboot your device immediately
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with Admin access.
2. From the main menu, click System.
3. Click Reboot.
4. Click Reboot to confirm that you want to reboot the device.
Command line
1. Log into the Connect IT Mini command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> reboot
Schedule reboots of your device
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Select System > Scheduled tasks.
4. For Reboot time, enter the time of the day that the device should reboot, using the format
HH:MM. The device will reboot at this time every day.
If a value is set for Reboot time but the device is unable to synchronize its time with an NTP
server, the device will reboot after it has been up for 24 hours. See
about configuring NTP servers.
5. Click Apply to save the configuration and apply the change.
Digi Connect IT® Mini User Guide
Reboot your Connect IT Mini device
System time
for information
493
Advertisement
Table of Contents
