Digi Connect IT Mini User Manual page 395

User authentication
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Groups.
4. For Add, type a name for the group and click g .
The group configuration window is displayed.
5. Click the following options, as appropriate, to enable or disable access rights for each:
Admin access
n
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access.
where value is either:
Full access full: provides users of this group with the ability to manage the Connect
l
IT Mini device by using the WebUI or the Admin CLI.
Read-only access read-only: provides users of this group with read-only access to
l
the WebUI and Admin CLI.
The default is Full access full.
Shell access
n
Shell access is not available if the Allow shell parameter has been disabled. See
shell access
Serial access
n
6. (Optional) Configure OpenVPN access. See for further information.
7. (Optional) Configure captive portal access:
a. Enable captive portal access rights for users of this group by checking the box next to
Captive portal access.
Digi Connect IT® Mini User Guide
for more information about the Allow shell parameter.
Authentication groups
Disable
395