Digi Connect IT Mini User Manual page 284

Hide thumbs Also See for Connect IT Mini:

Table of Contents

Repeat this step to list additional firewall zones.

4. (Optional) If you have your own signed SSL certificate, set the certificate and private key in

PEM format. If not set, the device will use an automatically-generated key.

(config)> service web_admin cert cert.pem

Password-protected certificate keys are not supported.

5. (Optional) Configure Multicast DNS (mDNS):

mDNS is a protocol that resolves host names in small networks that do not have a DNS server.

mDNS is enabled by default. To disable mDNS, or enable it if it has been disabled:

To enable the mDNS protocol:

(config)> service web_admin mdns enable true

To disable the mDNS protocl:

(config)> service web_admin mdns enable false

6. (Optional) Set the port number for this service.

The default setting of 443 normally should not be changed.

(config)> service web_admin port 444

7. (Optional) Configure the device to allow legacy encryption protocols.

Legacy encryption protocols allow clients to connect to the HTTPS session by using encryption

protocols older than TLS 1.2, in addition to TLS 1.2 and later protocols. This option is disabled by

Digi Connect IT® Mini User Guide

(config)> ... firewall zone ?

Zones: A list of groups of network interfaces that can be referred to by

filtering rules and access control lists.

Additional Configuration

-------------------------------------------------------------------------------

dynamic_routes

Configure the web administration service