Table of Contents
Advertisement
System administration
where value is either true or false. yes or no, and 1 or 0 are also allowed.
e. Allow for the configuration to be updated, including by custom scripts, during the
maintenance window:
system schedule maintenance config_check value
(config)>
where value is either true or false. yes or no, and 1 or 0 are also allowed.
4. (Optional) Schedule custom scripts:
a. Add a script:
(config)> add system schedule script end
(config system schedule script 0)>
Scheduled scripts are enabled by default. To disable:
(config system schedule script 0)> enable false
(config system schedule script 0)>
b. (Optional) Provide a label for the script.
(config system schedule script 0)> label value
(config system schedule script 0)>
where value is any string. if spaces are used, enclose value within double quotes.
c. Set the mode that will be used to run the script:
(config system schedule script 0)> when mode
(config system schedule script 0)>
where mode is one of the following:
n
n
Digi Connect IT® Mini User Guide
boot: The script will run once each time the device boots.
If boot is selected, set the action that will be taken when the script completes:
l
(config system schedule script 0)> exit_action action
(config system schedule script 0)>
where action is one of the following:
none: Action taken when the script exits.
o
restart: Runs the script repeatedly.
o
reboot: The device will reboot when the script completes.
o
interval: The script will start running at the specified interval, within 30 seconds
after the configuration change is saved. If interval is selected:
Set the interval:
l
(config system schedule script 0)> on_interval value
(config system schedule script 0)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
Schedule system maintenance tasks
507
Advertisement
Table of Contents
