Command line interface
schema version "445"
>
show system
The
show system
usage.
> show system
Model
Serial Number
SKU
Hostname
MAC
Hardware Version
Firmware Version
Alt. Firmware Version : 20.8.22.32
Bootloader Version
Current Time
CPU
Uptime
Temperature
>
show network
The
show network
> show network
Interface
Proto Status Address
---------------- ----- ------- -------------------------------
defaultip
IPv4 up
defaultlinklocal IPv4 up
lan
IPv4 up
lan
IPv6 up
loopback
IPv4 up
wan
IPv4 up
wan
IPv6 up
>
Device configuration using the command line interface
The config command allows for device configuration from the command line. All configuration tasks
that can be performed by using the WebUI can also be performed by using the config command.
There are two ways to invoke the config command from the CLI:
Execute the config command and parameters at the root prompt. See
n
commands at the root Admin CLI prompt
Digi Connect IT® Mini User Guide
command displays system information and statistics for the device, including CPU
: Digi Connect IT Mini
: Connect IT Mini-000065
: Connect IT Mini
: Connect IT Mini
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 20.8.22.32
: 19.7.23.0-15f936e0ed
: Fri, 28 Aug 2020 9:25:12 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds (541317s)
: 40C
command displays status and statistics for network interfaces.
192.168.210.1/24
169.254.100.100/16
192.168.2.1
0:0:0:0:0:ffff:c0a8:301
127.0.0.1/8
192.168.3.1/24
fd00:2704::240:ffff:fe80:120/64
Device configuration using the command line interface
for more information.
Execute configuration
592