Digi Connect IT Mini User Manual page 495

System administration
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with Admin access.
2. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
3. In the Erase configuration section, click ERASE.
4. Click CONFIRM.
5. After resetting the device:
a. Connect to the Connect IT Mini by using the serial port or by using an Ethernet cable to
connect the Connect IT Mini ETH port to your PC.
b. Log into the Connect IT Mini:
User name: Use the default user name: admin.
Password: Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
Note If your device was manufactured prior to the release of firmware version 19.11.x, the
default user name may be root.
When you first log into the WebUI or the command line, you must change the password for
the admin user. See
c. Reset the default password for the admin account. See
the admin user
Command line
1. Log into the Connect IT Mini command line as a user with Admin access.
Digi Connect IT® Mini User Guide
Change the default password for the admin user
for further information.
Reset the device to factory defaults
for instructions.
Change the default password for
495