Configure System Information - Digi Connect IT Mini User Manual

System administration
1. Log into the Connect IT Mini command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system verbose at the prompt:
> show system verbose
Model
Serial Number
SKU
Hostname
MAC
Hardware Version
Firmware Version
Alt. Firmware Version : 20.8.22.32
Bootloader Version
Schema Version
Timezone
Current Time
CPU
Uptime
Temperature
Disk
----
Load Average
RAM Usage
Disk /etc/config Usage : 18.421MB/4546.371MB(0%)
Disk /opt Usage
Disk /overlay Usage
Disk /tmp Usage
Disk /var Usage
>

Configure system information

You can configure information related to your Connect IT Mini device, such as providing a name and
location for the device.
Configuration items
A name for the device.
n
The name of a contact for the device.
n
The location of the device.
n
A description of the device.
n
A banner that will be displayed when users access terminal services on the device.
n
To enter system information:
Digi Connect IT® Mini User Guide
: Digi Connect IT Mini
: Connect IT Mini-000065
: Connect IT Mini
: Connect IT Mini
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 20.8.22.32
: 19.7.23.0-15f936e0ed
: 715
: UTC
: Fri, 28 Aug 2020 9:25:12 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds (541317s)
: 40C
: 0.09, 0.10, 0.08
: 127.843MB/1880.421MB(6%)
: -4523.-46MB/549.304MB(-822%)
: MB/MB(%)
: 0.007MB/256.0MB(0%)
: 1.765MB/256.0MB(1%)
Configure system information
485