Table of Contents
Advertisement
Applications
Task two: Configure the application to run automatically
Note
This feature does not provide syntax or error checking. Certain commands can render the device
inoperable. Use with care.
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Scheduled tasks > Custom scripts.
4. For Add Script, click g .
The schedule script configuration window is displayed.
Scheduled scripts are enabled by default. To disable, click Enable to toggle off.
5. (Optional) For Label, provide a label for the script.
6. For Run mode, select the mode that will be used to run the script. Available options are:
On boot: The script will run once each time the device boots.
n
If On boot is selected, select the action that will be taken when the script
l
completes in Exit action. Available options are:
o
o
o
Interval: The script will start running at the specified interval, within 30 seconds after
n
the configuration change is saved.
Digi Connect IT® Mini User Guide
None: Action taken when the script exits.
Restart script: Runs the script repeatedly.
Reboot: The device will reboot when the script completes.
Configure applications to run automatically
348
Advertisement
Table of Contents
