Digi Connect IT Mini User Manual page 131

Serial port
4. For Mode, select one of the following:
Login: Allows the user to log into the device through the serial port.
n
Remote access: Allows for remote access to another device that is connected to the
n
serial port.
Power Management: Allows you to configure the port for use with a power controller.
n
See
The default is Remote Access.
5. (Optional) For Label, enter a label that will be used when referring to this port.
6. Click to expand Serial Settings.
For Baud rate, select the baud rate used by the device to which you want to connect.
n
For Data bits, select the number of data bits used by the device to which you want to
n
connect.
For Parity, select the type of parity used by the device to which you want to connect.
n
For Stop bits, select the number of stop bits used by the device to which you want to
n
connect.
For Flow control, select the type of flow control used by the device to which you want
n
to connect.
Digi Connect IT® Mini User Guide
Configure Remote Power Management.
Configure the serial port
131