Digi Connect IT Mini User Manual page 174

Routing
Task 2: Configure VRRP+ on device one
1. Click to expand VRRP+.
2. Click Enable.
3. Click to expand Monitor interfaces.
4. Click gto add an interface for monitoring.
5. Select Interface: Modem.
6. For Priority modifier, type 30.
Task 3: Configure the IP address for the VRRP interface, ETH, on device one
1. Click Network > Interfaces > ETH > IPv4
2. For Address, type 192.168.3.1/24.
Task 4: Configure the DHCP server for ETH on device one
1. Click to expand Network > Interfaces > ETH > IPv4 > DHCP Server
2. For Lease range start, leave at the default of 100.
3. For Lease range end, type 199.
4. Click to expand Advanced settings.
5. For Gateway, select Custom.
6. For Custom gateway, enter 192.168.3.3.
7. Click Apply to save the configuration and apply the change.
Digi Connect IT® Mini User Guide
Virtual Router Redundancy Protocol (VRRP)
174