Table of Contents
Advertisement
Configuration and management
The default user is admin:
n
If the device is at 19.11.x or newer when manufactured.
l
If the device has been upgraded from 19.8.x or older to 19.11.x or newer and has
l
been factory reset after the upgrade.
After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
Dashboard
area
Description
Summarizes network statistics: the total number of bytes sent and received over all
Network
configured bridges and Ethernet devices.
activity
Digi
Displays the device connection status for Digi Remote Manager, the amount of time
Remote
the connection has been up, and the Digi Remote Manager device ID.
See
Manager
Device
Displays the Connect IT Mini device's status, statistics, and identifying information.
Network
Displays the status of the network interfaces configured on the device.
Interfaces
Modems
Provides information about the signal strength and technology of the cellular modem
(s).
Log out of the web interface
On the main menu, click your user name. Click Log out.
n
Manually configure a PC to connect to the Connect IT
To manually connect to the device, you must manually set an IP address on your PC to be able to
communicate with the Connect IT.
Digi Connect IT® Mini User Guide
Using Digi Remote
Manager.
Using the web interface
28
Advertisement
Table of Contents
