Table of Contents
Advertisement
Get started with the Connect IT Mini
Connect hardware and connect to site network using an Ethernet
port
This section explains how to connect the Connect IT hardware and then connect to a site network,
using an Ethernet cable.
Prerequisites
CAT 5/6 Ethernet cable, which must be purchased separately.
n
To connect the hardware and connect to a site network:
1. Plug the power supply unit into an AC power outlet and connect the other end to the PWR plug
on the Connect IT Mini.
2. Connect one end of an Ethernet cable to your site gateway.
3. Connect the other end of the Ethernet cable to the ETH port on the Connect IT Mini.
Digi Connect IT® Mini User Guide
Connect the hardware to a network
18
Advertisement
Table of Contents
