Table of Contents
Advertisement
User authentication
8. Add TACACS+ to the authentication methods:
a. Click Authentication > Methods.
b. For Add method, click g .
c. Select TACACS+ for the new method from the Method drop-down.
Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned. See
information about rearranging the position of the methods in the list.
9. Click Apply to save the configuration and apply the change.
Command line
1. Log into the Connect IT Mini command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. (Optional) Prevent other authentication methods from being used if TACACS+ authentication
fails. Other authentication methods will only be used if the TACACS+ server is unavailable.
(config)> auth tacacs+ authoritative true
(config)>
4. (Optional) Configure the group_attribute. This is the name of the attribute used in the
TACACS+ server's configuration to identify the Connect IT Mini authentication group or groups
that the user is a member of. For example, in
in the sample tac_plus.conf file is groupname, which is also the default setting for the group_
attribute in the Connect IT Mini configuration.
(config)> auth tacacs+ group_attribute attribute-name
(config)>
Digi Connect IT® Mini User Guide
Terminal Access Controller Access-Control System Plus (TACACS+)
Rearrange the position of authentication methods
TACACS+ user
configuration, the group attribute
for
416
Advertisement
Table of Contents
