Table of Contents
Advertisement
System administration
n
n
d. Set the commands that will execute the script:
(config system schedule script 0)> commands filename
(config system schedule script 0)>
where filename is the path and filename of the script, and any related command line
information.
If the script begins with #!, then the script will be invoked in the location specified by the
path for the script command. Otherwise, the default shell will be used (equivalent to
#!/bin/sh).
e. Script logging options:
n
n
If syslog_stdout and syslog_stderr are not enabled, only the script's exit code is written
to the system log.
f. Set the maximum amount of memory available to be used by the script and its
subprocesses:
(config system schedule script 0)> max_memory value
(config system schedule script 0)>
Digi Connect IT® Mini User Guide
For example, to set on_interval to ten minutes, enter either 10m or 600s:
(config system schedule script 0)> on_interval 600s
(config system schedule script 0)>
(Optional) Configure the script to run only a single instance at a time:
l
(config system schedule script 0)> once true
(config system schedule script 0)>
If once is set to false, a new instance of the script will be started at every
interval, regardless of whether the script is still running from a previous
interval.
set_time: Runs the script at a specified time of the day.
If set_time is set, set the time that the script should run, using the format
l
HH:MM:
(config system schedule script 0)> run_time HH : MM
(config system schedule script 0)>
maintenance_time: The script will run during the system maintenance time
window.
To log the script's output to the system log:
(config system schedule script 0)> syslog_stdout true
(config system schedule script 0)>
To log script errors to the system log:
(config system schedule script 0)> syslog_stderr true
(config system schedule script 0)>
Schedule system maintenance tasks
508
Advertisement
Table of Contents
