Digi Connect IT Mini User Manual page 266

Virtual Private Networks (VPN)
4. For Device, select the GRE tunnel created in
5. Click to expand IPv4.
6. For Address, type 172.31.1.1/30 for a virtual IP address on the GRE tunnel.
7. Click Apply to save the configuration and apply the change.
Command line
1. At the command line, type config to enter configuration mode:
> config
(config)>
2. Add an interface named gre_interface2:
(config)> add network interface gre_interface2
(config network interface gre_interface2)>
3. Set the zone to internal:
(config network interface gre_interface2)> zone internal
(config network interface gre_interface2)>
4. Set the device to the GRE tunnel created in
(config network interface gre_interface2)> device /vpn/iptunnel/gre_tunnel2
(config network interface gre_interface2)>
Digi Connect IT® Mini User Guide
Generic Routing Encapsulation (GRE)
Task three (IP tunnel: gre_tunnel2).
Task three (/vpn/iptunnel/gre_tunnel2):
266