Table of Contents
Advertisement
Services
Repeat this step to list additional firewall zones.
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Use the iPerf service
Your Connect IT Mini device includes an iPerf3 server that you can use to test the performance of your
network.
IPerf3 is a command-line tool that measures the maximum network throughput an interface can
handle. This is useful when diagnosing network speed issues, to determine, for example, whether a
cellular connection is providing expected throughput.
The Connect IT Mini implementation of iPerf3 supports testing with both TCP and UDP.
Note
Using iPerf clients that are at a version earlier than iPerf3 to connect to the Connect IT Mini
device's iPerf3 server may result in unpredictable results. As a result, Digi recommends using an iPerf
client at version 3 or newer to connect to the Connect IT Mini device's iPerf3 server.
Required configuration items
Enable the iPerf server on the Connect IT Mini device.
n
An iPerf3 client installed on a remote host. iPerf3 software can be downloaded at
n
https://iperf.fr/iperf-download.php.
Additional configuration Items
The port that the Connect IT Mini device's iPerf server will use to listen for incoming
n
connections.
The access control list for the iPerf server.
n
When the iPerf server is enabled, the Connect IT Mini device will automatically configure its
firewall rules to allow incoming connections on the configured listening port. You can restrict
access by configuring the access control list for the iPerf server.
Digi Connect IT® Mini User Guide
setup
(config)>
Use the iPerf service
340
Advertisement
Table of Contents
