Table of Contents
Advertisement
Configure Remote Power Management
Command
~bN
~b?
7. Enter ~b. to disconnect from the port.
View power controller status and manage power (Administrators)
You can view the status of each outlet configured for a power controller and turn the power to an
outlet on and off.
Note
This process can only be done in the local web UI. Only admin users can access the Power
Controllers page. Non-administrators can control the power in a Terminal screen. See
outlet power from a terminal (all
1.
Log in to the web
2. Click Status > Power Controllers. The Power Controller Status page appears.
3. You can view the power controller power status. Each outlet and power controller combination
configured for remote power management appears in the page. The state of the power for
each outlet is displayed in the State column:
on: The outlet has power.
n
off: The outlet does not have power.
n
unknown: The Connect IT cannot get a status from the power controller.
n
4. You can change the power state for an outlet.
a. From the Change State list box, select an option from the list box.
n
n
n
b. Click Apply.
5. You can view the power manager log.
A log of all remote power management events appears in the Log shown at the bottom of the
page. Click Download to download a copy of the log.
Control the outlet power from the Serial Status page
A user can access the Serial Status page in the web UI and control the power for an outlet connected
to a serial port.
1.
Log in to the web
2. Click Status > Serial. The Serial Status screen displays.
3. If a serial port is configured for communication with a 3rd-party device plugged into an outlet,
the power status displays in the Power column.
ON: ON displays in green when there is power to the outlet configured for the serial
n
port. Click ON to turn power to the outlet off.
Digi Connect IT® Mini User Guide
Manage the power to the power controller outlets from the Connect IT
Description
Power on all the outlets on this port.
Display a list of commands.
users).
UI.
On: Turn on the power to that outlet.
Off: Turn off the power to that outlet.
Cycle: Turn the power off, then on. If the power state for the outlet is currently off,
then the power is just turned on.
UI.
Control the
38
Advertisement
Table of Contents
