Digi Connect IT Mini User Manual page 130

Hide thumbs Also See for Connect IT Mini:

Table of Contents

Exclusive access: enabled

Idle timeout: 15m

You can also configure the serial port by using Device Configuration > Serial. Changes made by

using either Device Configuration or Serial Configuration will be reflected in both.

To change the configuration to match the serial configuration of the device to which you want to

1. Log into the Connect IT Mini WebUI as a user with Admin access.

2. On the menu, click System. Under Configuration, click Serial Configuration.

The Serial Configuration page is displayed.

3. Click on the port name to expand the port you want to configure.

The Settings section that display depend on the mode selected for the port. If Remote Access

is selected, all sections display. If Login or Power Management are selected, only the Serial

Settings section displays.

The serial port is enabled by default. To disable the serial port, toggle off Enable.

Digi Connect IT® Mini User Guide

Configure the serial port