Table of Contents
Advertisement
Configuration and management
Review Connect IT Mini default settings
You can review the default settings for your Connect IT Mini device by using the local WebUI or Digi
Remote Manager:
Local WebUI
1. Log into the Connect IT Mini WebUI as a user with Admin access. See
for details.
2. On the menu, click System > Device Configuration.
Digi Remote Manager
1. If you have not already done so, connect to your Digi Remote Manager account.
2. Click Device Management to display a list of your devices.
3. Locate and select your device as described in
your
device.
4. Click Configure.
The following tables list important factory default settings for the Connect IT Mini.
Default interface configuration
Interface type
Wide Area Networks (WAN)
Wireless Wide Area
Networks (WAN)
Local Area Networks (LANs)
Digi Connect IT® Mini User Guide
Use Digi Remote Manager to view and manage
Preconfigured
interfaces
Devices
WAN
n
n
WWAN
n
n
Loopback
Ethernet:
n
n
Loopback
Default IP
Ethernet: ETH
n
n
Default Link-
Ethernet: ETH
n
n
local IP
Review Connect IT Mini default settings
Using the web interface
Default configuration
Ethernet:
Firewall zone: Edge
n
WAN priority: Metric=5
ETH
n
IP address: DHCP client
n
Digi SureLink
n
enabled for IPv4
Modem
Firewall zone: External
n
WAN priority: Metric=3
n
SIM failover after 5
n
attempts
Digi SureLink
n
enabled for IPv4
Firewall zone:
n
Loopback
IP address: 127.0.0.1/8
n
Firewall zone: Setup
n
IP address
n
192.168.210.1/24
Firewall zone: Setup
n
IP address
n
169.254.100.100/16
TM
TM
23
Advertisement
Table of Contents
