Table of Contents
Advertisement
Interfaces
n
The default is auto.
d. Set the domain name that should be appended to host names:
(config)> network interface my_lan ipv4 dhcp_server advanced domain_suffix name
(config)>
e. Set the IP address or host name of the primary and secondary DNS, the primary and
secondary NTP server, and the primary and secondary WINS servers:
(config)> network interface my_lan ipv4 dhcp_server advanced primary_dns value
(config)> network interface my_lan ipv4 dhcp_server advanced secondary_dns value
(config)> network interface my_lan ipv4 dhcp_server advanced primary_ntp value
(config)> network interface my_lan ipv4 dhcp_server advanced secondary_ntp value
(config)> network interface my_lan ipv4 dhcp_server advanced primary_wins value
(config)> network interface my_lan ipv4 dhcp_server advanced secondary_wins value
(config)>
where value is one of:
n
n
n
The default is auto.
f. Set the IP address or host name of the TFTP server:
(config)> network interface my_lan ipv4 dhcp_server advanced nftp_server ip_address
(config)>
g. Set the relative path and file name of the bootfile on the TFTP server:
(config)> network interface my_lan ipv4 dhcp_server advanced bootfile filename
(config)>
8. See
Configure DHCP options
9. See
Map static IP addresses to hosts
10. Save the configuration and apply the change:
(config network interface my_lan ipv4 dhcp_server advanced static_lease 0)> save
Configuration saved.
>
Digi Connect IT® Mini User Guide
custom: Allows you to identify a custom MTU to be broadcast:
(config)> network interface my_lan ipv4 dhcp_server advanced mtu_custom mtu
(config)>
none: No server is broadcast.
auto: Broadcasts the Connect IT Mini device's server.
custom: Allows you to identify the IP address of the server. For example:
(config)> network interface my_lan ipv4 dhcp_server advanced primary_dns_custom
ip_address
(config)>
for information about custom DHCP options.
for information about static leases.
Local Area Networks (LANs)
111
Advertisement
Table of Contents
