Digi Connect IT Mini User Manual page 49

Interfaces
my_wan node in the configuration schema:
(config)> network interface my_wan
(config network interface my_wan)>
4. Enable SureLink.
SureLink can be enabled for both IPv4 and IPv6 configurations. By default, SureLink is enabled
for IPv4 for the preconfigured WAN (eth) and WWAN (modemwwan2). It is disabled for IPv6.
(config network interface my_wan> ipv4 surelink enable true
(config network interface my_wan)>
5. Add a test target:
(config network interface my_wan)> add ipv4 surelink target end
(config network interface my_wan ipv4 surelink target 0)>
6. Set the test type:
(config network interface my_wan ipv4 surelink target 0)> test value
(config network interface my_wan ipv4 surelink target 0)>
where value is one of:
ping: Tests connectivity by sending an ICMP echo request to a specified hostname or IP
n
address.
Specify the hostname or IP address:
l
(Optional) Set the size, in bytes, of the ping packet:
l
dns: Tests connectivity by sending a DNS query to the specified DNS server.
n
Specify the DNS server. Allowed value is the IP address of the DNS server.
l
dns_configured: Tests connectivity by sending a DNS query to the DNS servers
n
configured for this interface.
http: Tests connectivity by sending an HTTP or HTTPS GET request to the specified URL.
n
Specify the url:
l
where value uses the format http[s]://hostname/[path]
interface_up: The interface is considered to be down based on the interfaces down
n
time, and the amount of time an initial connection to the interface takes before this
Digi Connect IT® Mini User Guide
(config network interface my_wan ipv4 surelink target 0)> ping_host host
(config network interface my_wan ipv4 surelink target 0)>
(config network interface my_wan ipv4 surelink target 0)> ping_size [ num ]
(config network interface my_wan ipv4 surelink target 0)>
(config network interface my_wan ipv4 surelink target 0)> dns_server ip_address
(config network interface my_wan ipv4 surelink target 0)>
(config network interface my_wan ipv4 surelink target 0)> http_url value
(config network interface my_wan ipv4 surelink target 0)>
Wide Area Networks (WANs)
49