Digi Connect IT Mini User Manual page 3

Revision
H
Digi Connect IT® Mini User Guide
Date
September 2020
Description
Release of Digi Connect IT Mini firmware version
20.8:
Support for NEMO/DMNR virtual private
n
networks.
Support for serial Modbus Gateway.
n
Support for VRRP+, an extension to the
n
VRRP standard that uses network
probing to monitor connections through
VRRP-enabled devices.
Cloud service enhancements:
n
Reduced data usage for reporting
l
health metrics to Digi Remote
Manager.
Added Monitoring > Device Health >
Only report changed values to Digi
Remote Manager option to control
sending metrics to Digi Remote
Manager on the basis of whether the
values have changed since they were
last reported.
Added Monitoring > Device Health >
l
Data point tuning configuration
options to fine tune what datapoints
are uploaded as health metrics to
Digi Remote Manager.
Added the ability to select Digi aView
l
as the cloud service.
Added the ability to duplicate firmware
n
to copy the active firmware to the
secondary firmware partition.
Moved the update firmware CLI
n
command to system firmware update.
Added new Authoritative option under
n
TACACS+, RADIUS, and LDAP user
authentication methods to prevent
falling back to additional authentication
methods.
Cisco Umbrella content filtering.
n
Added options under System > Log >
n
Server list to allow users to specify the
TCP/UDP protocol and port of the
remote syslog server.
Serial port enhancements:
n
3