Configure the Connect IT 16/48
7. From the APN version list box, select the IP version for which the modem may request
addresses.
8. From the Authentication method list box, select the authentication method used to connect
to the cellular network. Authentication is attempted only if a user name has been set.
9. Click Save or Apply.
Configure a custom gateway for the modem
You can configure a custom gateway/netmask that overrides the automatic values normally provided.
This is particularly useful when supporting a group of static UP addresses that communicate directly.
1.
Log in
to manage the Connect IT.
2.
Access the Modem
3. Expand the Custom gateway section.
4. Configure the settings.
Setting
Enable
Gateway/Netmask
5. Click Save or Apply.
Configure an IPv4 network interface for the modem
You can configure an IPv4 network interface.
1.
Log in
to manage the Connect IT.
2.
Access the Modem
3. Expand the IPv4 section.
4. Configure the settings.
Setting
Enable
Digi Connect IT® 16/48 User Guide
section.
Description
Select Enable to enable a custom gateway for this
network interface.
The gateway address and netmask to use for this
network interface. If either the gateway address or
the netmaks is all 0's, it is not overridden. For
example, 0.0.0.0/32 will operate as normal using the
network-provided gateway IP, but with a /32
netmask.
section.
Description
Select Enable to enable an IPv4 network interface.
Configure a modem
35