Table of Contents
Advertisement
Virtual Private Networks (VPN)
b. Configure whether the additional OpenVPN parameters should override default options:
(config vpn openvpn server name )> advanced_options override true
(config vpn openvpn server name )>
c. Set the additional OpenVPN parameters:
(config vpn openvpn server name )> extra parameters
(config vpn openvpn server name )>
10. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
11. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure an OpenVPN Authentication Group and User
If username and password authentication is used for the OpenVPN server, you must create an
OpenVPN authentication group and user.
See
Configure an OpenVPN server
username and password authentication. See
information about creating authentication groups and users.
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Add an OpenVPN authentication group:
a. Click Authentication > Groups.
b. For Add Group, type a name for the group (for example, OpenVPN_Group) and click g .
The new authentication group configuration is displayed.
Digi Connect IT® Mini User Guide
for information about configuring an OpenVPN server to use
Connect IT Mini user authentication
OpenVPN
for more
227
Advertisement
Table of Contents
