Hardware
Exchange power tips
The Connect IT Mini may include four interchangeable plug tips that allow the Power Supply Unit
(PSU) to operate in most countries. The PSU comes with the United States style plug installed.
To change the plug tip:
1. Place the tip of a small flathead screw driver in the half-circle area below the power prongs
(the PUSH button), and slide the current plug tip forward.
2. Pull off the attached plug converter.
3. Slide the new tip down into place until it clicks.
Note
For more information regarding power-tip compatibility with global deployments, visit
www.worldstandards.eu/electricity/plugs-and-sockets/.
Digi Connect IT® Mini User Guide
Exchange power tips
579