Table of Contents
Advertisement
System administration
5. For Duration window, select the amount of time that the maintenance tasks will be run. If
Immediately is selected, all scheduled tasks will begin at the exact time specified in Start
time.
6. For Frequency, select either Daily or Weekly for the frequency that the maintenance tasks
should be run.
7. (Optional) Click to enable Modem firmware update to instruct the system to look for any
updated modem firmware during the maintenance window. If updated firmware is found, it will
then be installed. Modem firmware update looks for updated firmware both on the local
device and over the network, using either a WAN or cellular connection.
8. (Optional) Click to enable Configuration check to allow for the configuration to be updated,
including by custom scripts, during the maintenance window.
9. (Optional) To schedule custom scripts:
a. Click Custom scripts.
Note
This feature does not provide syntax or error checking. Certain commands can
render the device inoperable. Use with care. Scripts created here are also automatically
entered in Configuration > Applications.
b. For Add Script, click g .
The schedule script configuration window is displayed.
Scheduled scripts are enabled by default. To disable, click Enable to toggle off.
c. (Optional) For Label, provide a label for the script.
d. For Run mode, select the mode that will be used to run the script. Available options are:
n
Digi Connect IT® Mini User Guide
On boot: The script will run once each time the device boots.
If On boot is selected, select the action that will be taken when the script
l
completes in Exit action. Available options are:
None: Action taken when the script exits.
o
Restart script: Runs the script repeatedly.
o
Reboot: The device will reboot when the script completes.
o
Schedule system maintenance tasks
504
Advertisement
Table of Contents
