Show Nemo Status - Digi Connect IT Mini User Manual

Hide thumbs Also See for Connect IT Mini:

Table of Contents

Virtual Private Networks (VPN)

b. (Optional) Repeat for additional interfaces.

14. Save the configuration and apply the change:

(config)> save

Configuration saved.

15. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Show NEMO status

1. Log into the Connect IT Mini WebUI as a user with Admin access.

2. On the menu, select Status > NEMO.

The NEMO page appears.

3. To view configuration details about an IPsec tunnel, click the (configuration) icon in the

upper right of the tunnel's status pane.

Command line

1. Log into the Connect IT Mini command line as a user with Admin access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. To display details about all configured NEMO tunnel, type the following at the prompt:

NEMO Enable Status Address Agent CoAddress

---- ------ ------ ------- ------- ----------

test true up

3. To display details about a specific tunnel:

> show nemo name test

test NEMO Status

----------------

Care of Address

Digi Connect IT® Mini User Guide

1.2.3.4 4.3.2.1 10.10.10.1

: 10.10.10.1

: 10.10.10.1 === 4.3.2.1