Digi Connect IT Mini User Manual page 220

Hide thumbs Also See for Connect IT Mini:
Table of Contents

Advertisement

Virtual Private Networks (VPN)
The OpenVPN server is enabled by default. To disable, click Enable.
5. For Device type, select the mode used by the OpenVPN server, either:
TUN (OpenVPN managed)
n
TAP - OpenVPN managed
n
TAP - Device only
n
See
OpenVPN
6. If TUN (OpenVPN managed) or TAP - OpenVPN managed is selected for Device type:
a. For Zone, select the firewall zone for the OpenVPN server. For TUN device types, this
should be set to Internal to treat clients as LAN devices.
b. (Optional) Select the Metric for the OpenVPN server. If multiple active routes match a
destination, the route with the lowest metric will be used. The default setting is 0.
c. For Address, type the IP address and subnet mask of the OpenVPN server.
d. (Optional) For First IP address and Last IP address, set the range of IP addresses that
the OpenVPN server will use when providing IP addresses to clients. The default is from 80
to 99.
7. (Optional) Set the VPN port that the OpenVPN server will use. The default is 1194.
8. For Server managed certificates, determine the method of certificate management. If
enabled, the server will manage certificates. If not enabled, certificates must be created
externally and added to the server.
9. If Server managed certificates is not enabled:
a. Select the Authentication type:
n
n
n
Digi Connect IT® Mini User Guide
for information about OpenVPN server modes.
Certificate only: Uses only certificates for client authentication. Each client
requires a public and private key.
Username/password only: Uses a username and password for client
authentication. You must create an OpenVPN authentication group and user. See
Configure an OpenVPN Authentication Group and User
Certificate and username/password: Uses both certificates and a username and
password for client authentication. Each client requires a public and private key,
and you must create an OpenVPN authentication group and user. See
OpenVPN Authentication Group and User
for instructions.
for instructions.
OpenVPN
Configure an
220

Advertisement

Table of Contents
loading

Table of Contents