Connect Equipment To The Connect It Usb Port - Digi Connect IT Mini User Manual

Connect equipment to the Connect IT
The Digi Connect IT Mini RS232 serial port is DTE and has the following pin configuration.
Console port and
DTE mode
1
2
3
4/5
6
7
8
Note Ring Indicate (RI) and Data Set Ready (DSR) are not implemented.
The serial port uses a female RJ45 jack to enable connection using UTP Ethernet cabling.

Connect equipment to the Connect IT USB port

The USB port on the Connect IT can provide console access to USB-based console ports or host a USB
device. The Connect IT has a TYPE A port. You should reference your device to select the proper USB
cable.
Digi Connect IT® Mini User Guide
Signal name Description
RTS Request to send
DCD
Data carrier detect
RXD Receive data
GND Ground
TXD Transmit data
DTR Data terminal ready
CTS Clear to send
Connect equipment to the Connect IT USB port
Output from
Connect IT
Input to Connect IT
Input to Connect IT
Signal
Ground
Output from
Connect IT
Output from
Connect IT
Input to Connect IT
20