Virtual Private Networks (VPN)
Command line
1. Log into the Connect IT Mini command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN clients, type the following at the prompt:
> show openvpn client all
Client
--------------- ------ ------- -------- -------- --------
OpenVPN_Client1 true connected
OpenVPN_Client2 true pending
>
3. To display details about a specific server:
> show openvpn client name OpenVPN_client1
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect IT® Mini User Guide
Enable Status
Username Use File Zone
true
internal
true
internal
OpenVPN
246