Digi Connect IT Mini User Manual page 636

Command line interface
icmp
Use ICMP ECHO for probes.
Syntax: BOOLEAN
Default: False
Optional: True
interface
Specifies the interface through which traceroute should send packets. By default, the interface is
selected according to the routing table.
Syntax: STRING
Optional: True
ipv6
If a hostname is defined as the value of the 'host' parameter, use the hosts IPV6 address.
Syntax: BOOLEAN
Default: False
Optional: True
max_ttl
Specifies the maximum number of hops (max time-to-live value) traceroute will probe.
Syntax: INT
Minimum: 1
Default: 30
nomap
Do not try to map IP addresses to host names when displaying them.
Syntax: BOOLEAN
Default: False
Optional: True
nqueries
Sets the number of probe packets per hop. A value of -1 indicated
Syntax: INT
Minimum: 1
Default: 3
packetlen
Total size of the probing packet. Default 60 bytes for IPv4 and 80 for Ipv6. A value of -1 specifies that
the default value will be used.
Syntax: INT
Minimum: -1
Default: -1
pausemsecs
Minimal time interval between probes
Digi Connect IT® Mini User Guide
Command line reference
636