Digi Connect IT Mini User Manual page 290

Hide thumbs Also See for Connect IT Mini:

Table of Contents

Repeat this step to list additional interfaces.

To limit access based on firewall zones:

(config)> add service ssh acl zone end value

Where value is a firewall zone defined on your device, or the any keyword.

Repeat this step to list additional firewall zones.

4. (Optional) Set the private key in PEM format. If not set, the device will use an automatically-

generated key.

(config)> service ssh key key.pem

5. (Optional) Configure Multicast DNS (mDNS)

mDNS is a protocol that resolves host names in small networks that do not have a DNS server.

mDNS is enabled by default. To disable mDNS, or enable it if it has been disabled:

To enable the mDNS protocol:

(config)> service ssh mdns enable true

Digi Connect IT® Mini User Guide

Display a list of available firewall zones:

Type ... firewall zone ? at the config prompt:

(config)> ... firewall zone ?

Zones: A list of groups of network interfaces that can be referred to by

filtering rules and access control lists.

Additional Configuration

-------------------------------------------------------------------------------

dynamic_routes

Configure SSH access